Tag Archives: College Physics by Openstax

College Physics by Openstax Chapter 2 Problem 64

(a) Take the slope of the curve in Figure 2.64 to find the jogger’s velocity at t=2.5 s. (b) Repeat at 7.5 s. These values must be consistent with the graph in Figure 2.65.

Solution:

Part A

To find the slope at t=2.5 s, we need the position values at t= 0 s and t=5 s. When $t = 0 \ \text{s}$ , $x = 0 \ \text{m}$ , and when $t = 5 \ \text{s}$ , $x = 17.5 \ \text{m}$ . The velocity at t=2.5 s is

\begin{align*} \text{velocity} & =\text{slope} \\ \text{v} & =\frac{\Delta x}{\Delta t} \\ \text{v} & = \frac{x_2-x_1}{t_2-t_1} \\ \text{v} & = \frac{17.5\ \text{m}-0\ \text{m}}{5 \ \text{s}-0\ \text{s}} \\ \text{v} & =3.5 \ \text{m/s} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \\ \end{align*}

Part B

When $t = 10 \ \text{s}$ , $x=2.5 \ \text{m}$ . Considering the points at t=5 s and t=10 s, the slope at 7.5 s is

\begin{align*} \text{velocity} & =\text{slope} \\ \text{v} & =\frac{\Delta x}{\Delta t} \\ \text{v} & = \frac{x_2-x_1}{t_2-t_1} \\ \text{v} & = \frac{2.5\ \text{m}-17.5\ \text{m}}{10 \ \text{s}-5\ \text{s}} \\ \text{v} & =-3.0 \ \text{m/s} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \\ \end{align*}

Advertisements

College Physics by Openstax Chapter 2 Problem 63

Construct the position graph for the subway shuttle train as shown in Figure 2.18(a). Your graph should show the position of the train, in kilometers, from t = 0 to 20 s. You will need to use the information on acceleration and velocity given in the examples for this figure.

Solution:

The figure with the corresponding examples are shown on this page: https://openstax.org/books/college-physics/pages/2-4-acceleration#import-auto-id2590556

The position-vs-time graph of the train’s motion is also graphed in the first figure here: https://openstax.org/apps/archive/20210713.205645/resources/a697c43432cdf2d09a02df47d2b746283b841fcd

(a) Position of the train over time. Notice that the train’s position changes slowly at the beginning of the journey, then more and more quickly as it picks up speed. Its position then changes more slowly as it slows down at the end of the journey. In the middle of the journey, while the velocity remains constant, the position changes at a constant rate. (b) The velocity of the train over time. The train’s velocity increases as it accelerates at the beginning of the journey. It remains the same in the middle of the journey (where there is no acceleration). It decreases as the train decelerates at the end of the journey. (c) The acceleration of the train over time. The train has positive acceleration as it speeds up at the beginning of the journey. It has no acceleration as it travels at constant velocity in the middle of the journey. Its acceleration is negative as it slows down at the end of the journey.

Advertisements

College Physics by Openstax Chapter 2 Problem 62

By taking the slope of the curve in Figure 2.63, verify that the acceleration is 3.2 m/s² at t=10 s .

Solution:

To solve for the slope of the curve at t=10 s, we need two points — 1 just before and 1 just after.

When $t=0 \ \text{s}$ , $v=166 \ \text{m/s}$ and when $t=20 \ \text{s}$ , $v=230 \ \text{m/s}$ . Therefore, the acceleration is

\begin{align*} \text{acceleration} & =\text{slope} \\ \text{acceleration} & =\frac{\Delta v}{\Delta t} \\ \text{a} & = \frac{v_2-v_1}{t_2-t_1} \\ \text{a} & = \frac{230\ \text{m/s}-166\ \text{m/s}}{20\ \text{s}-0\ \text{s}} \\ \text{a} & =3.2\ \text{m/s}^2 \\ \end{align*}

Note that the values are approximated to satisfy the given acceleration in the problem statement. The values may differ from one’s answer due to some uncertainties of a graph.

Advertisements

College Physics by Openstax Chapter 2 Problem 61

Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s.

Solution:

We can obviously see from the graph that it is a straight line or approximately a straight line. In this case, the slope is constant.

To get an approximate slope at t=30 s, we can use the values at t=20 s and t=40 s. When $t=20\ \text{s}$ , $x=7\ \text{m}$ and when $t=40\ \text{s}$ , $x=12\ \text{m}$ .

\begin{align*} \text{slope} & =\frac{\Delta x}{\Delta t} \\ \text{slope} & = \frac{x_2-x_1}{t_2-t_1} \\ \text{slope} & = \frac{12\ \text{m}-7\ \text{m}}{40\ \text{s}-20\ \text{s}} \\ \text{slope} & =0.25\ \text{m/s} \end{align*}

Although not equal, the computed slope is almost the same with 0.24 m/s. This is due to the fact that values are uncertainties when using graphs. The difference is not really significant for this case.

Advertisements

College Physics by Openstax Chapter 2 Problem 60

Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s. Assume all values are known to 2 significant figures.

Solution:

We can obviously see from the graph that it is a straight line or approximately a straight line. In this case, the slope is constant.

To get an approximate slope at t=30 s, we can use the values at t=20 s and t=40 s. When $t=20\ \text{s}$ , $x=7\ \text{m}$ and when $t=40\ \text{s}$ , $x=12\ \text{m}$ .

\begin{align*} \text{slope} & =\frac{\Delta x}{\Delta t} \\ \text{slope} & = \frac{x_2-x_1}{t_2-t_1} \\ \text{slope} & = \frac{12\ \text{m}-7\ \text{m}}{40\ \text{s}-20\ \text{s}} \\ \text{slope} & =0.25\ \text{m/s} \end{align*}

Although not equal, the computed slope is almost the same with 0.24 m/s. This is due to the fact that values are uncertain when using graphs. The difference is not really significant for this case.

Advertisements

College Physics by Openstax Chapter 2 Problem 59

(a) By taking the slope of the curve in Figure 2.60, verify that the velocity of the jet car is 115 m/s at t=20 s. (b) By taking the slope of the curve at any point in Figure 2.61, verify that the jet car’s acceleration is 5.0 m/s² .

Solution:

Part A

Figure A shows the approximate slope of the curve at time 20 seconds.

To solve for the slope of this line, we need to approximate by using two points. In this case, we shall use the points at time 15 seconds and 25 seconds.

Approximately, when $t=15\ \text{s}$ , the position is $x=1000\ \text{m}$ , and when $t=25\ \text{s}$ , the position is $x=2150\ \text{m}$ . Thefore,

\begin{align*} \text{velocity }& = \text{slope} \\ v& = \frac{\Delta x}{\Delta t} \\ v& = \frac{x_2-x_1}{t_2-t_1} \\ v& = \frac{2150\ \text{m}-1000\ \text{m}}{25\ \text{s}-15\ \text{s}}\\ v& = 115\ \text{m/s} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

Part B

One can immediately figure out from the given graph that it is a straight line. The slope of the line can be computed by using any two points in the line.

Here, $v=15\ \text{m/s}$ when $t=0\ \text{s}$ , and $v=40 \ \text{m/s}$ when $t=5\ \text{s}$ . The acceleration is

\begin{align*} \text{acceleration}& = \text{slope} \\ a& = \frac{\Delta v}{\Delta t}\\ a& = \frac{v_2-v_1}{t_2-t_1} \\ a& = \frac{40\ \text{m/s}-15\ \text{m/s}}{5\ \text{s}-0\ \text{s}}\\ a& = 5.0\ \text{m/s}^2 \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

Advertisements

College Physics by Openstax Chapter 2 Problem 58

A soft tennis ball is dropped onto a hard floor from a height of 1.50 m and rebounds to a height of 1.10 m. (a) Calculate its velocity just before it strikes the floor. (b) Calculate its velocity just after it leaves the floor on its way back up. (c) Calculate its acceleration during contact with the floor if that contact lasts 3.50 ms (3.50×10⁻³s) . (d) How much did the ball compress during its collision with the floor, assuming the floor is absolutely rigid?

Solution:

The concept is the same with Problem 2.56.

Part A

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \Delta y \\ \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \left( y_2 - y_1 \right) \\ v_{y_2} & = \sqrt{\left( v_{y_1} \right)^2 + 2 a \left( y_2 - y_1 \right)} \\ v_{y_2} & = - \sqrt{\left( 0 \right)^2+2\left( -9.81\ \text{m/s}^2 \right)\left( 0\ \text{m} - 1.50\ \text{m} \right)} \\ v_{y_2} & = - 5.42 \ \text{m/s} \qquad {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

Part B

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \Delta y \\ \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \left( y_2 - y_1 \right) \\ \left( v_{y_1} \right)^2 & = \left( v_{y_2} \right)^2 - 2 a \left( y_2 - y_1 \right) \\ v_{y_1} & = \sqrt{\left( v_{y_2} \right)^2 - 2 a \left( y_2 - y_1 \right)} \\ v_{y_1} & = \sqrt{\left( 0 \ \text{m/s} \right)^2 -2\left( -9.81 \ \text{m/s}^2 \right) \left( 1.10 \ \text{m} - 0 \ \text{m} \right) }\\ v_{y_1} & = 4.65 \ \text{m/s} \qquad {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

Part C

\begin{align*} a & = \frac{\Delta v}{\Delta t} \\ a & = \frac{v_2-v_1}{\Delta t} \\ a & = \frac{4.65 \ \text{m/s} - \left( -5.42 \ \text{m/s} \right)}{3.50 \times 10^{-3} \ \text{s}} \\ a & = 2877 \ \text{m/s}^2 \\ a & = 2.88 \times 10^{3}\ \text{m/s}^2 \ \qquad {\color{DarkOrange} \left( \text{Answer} \right)}\\ \end{align*}

Part D

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \Delta y \\ \Delta y & = \frac{\left( v_{y_2} \right)^2 - \left( v_{y_1} \right)^2}{2 a} \\ \Delta y & = \frac{\left( 0 \ \text{m/s} \right)^2 - \left( -5.42 \ \text{m/s} \right)^2}{2\left( 2.88 \times 10^3 \ \text{m/s}^2 \right)}\\ \Delta y & = -0.00510 \ \text{m} \\ \Delta y & = -5.10 \times 10^{-3} \ \text{m} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)}\\ \end{align*}

Advertisements

College Physics by Openstax Chapter 2 Problem 57

A coin is dropped from a hot-air balloon that is 300 m above the ground and rising at 10.0 m/s upward. For the coin, find (a) the maximum height reached, (b) its position and velocity 4.00 s after being released, and (c) the time before it hits the ground.

Solution:

Part A

Consider Figure A.

We are interested in two positions. Position 1 is where the coin is dropped. At this position, the coin is 300 m above the ground, the time is 0 s, and the velocity is 10.0 m/s upward.

Position 2 is the highest point of the coin reaches. At this position, the velocity is equal to 0 m/s.

Position 1 is the initial position and position 2 is the final position. Solve for the value of y₂.

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 +2a \Delta y \\ \Delta y & = \frac{\left( v_{y_2} \right)^2 - \left( v_{y_1} \right)^2}{2a} \\ y_2 - y_1 & = \frac{\left( v_{y_2} \right)^2 - \left( v_{y_1} \right)^2}{2a} \\ y_2& = \frac{\left( v_{y_2} \right)^2 - \left( v_{y_1} \right)^2}{2a} +y_1 \\ y_2 & = \frac{\left( 0 \ \text{m/s} \right)^2-\left( 10.0\ \text{m/s} \right)^2}{2\left( -9.81 \ \text{m/s}^2 \right)}+300\ \text{m} \\ y_2 & =305 \ \text{m} \ \qquad {\color{DarkOrange} \left( \text{Answer} \right)}\\ \end{align*}

$\therefore$ The maximum height reached by the coin is about 305 meters from the ground.

Part B

We do not know the position 4 seconds after the coin has been released, the answer can be above or below the initial point. We can actually use one of the kinematical equations to solve for the final position given the time. Here, the initial position is the point of release and the final position is the point of interest at 4.00 seconds after release.

\begin{align*} \Delta y & = v_{y_1}t+\frac{1}{2}at^2 \\ y_2 - y_1 & = v_{y_1}t+\frac{1}{2}at^2 \\ y_2 & = y_1 + v_{y_1}t+\frac{1}{2}at^2 \\ y_2 & = 300\ \text{m} +\left( 10\ \text{m/s} \right)\left( 4.00\ \text{s} \right)+\frac{1}{2}\left( -9.81\ \text{m/s}^2 \right)\left( 4.00\ \text{s} \right)^2\\ y_2 & = 261.52\ \text{m} \\ y_2 & = 262\ \text{m}\ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \\ \end{align*}

$\therefore$ The coin is at a height of 262 meters above the ground 4.00 seconds after release. That is, the coin is already dropping and it is already below the release point.

Solving for the velocity 4.00 seconds after release considering the same initial and final position.

\begin{align*} v_{y_2} & = v_{y_1}+at \\ v_{y_2} & = 10\ \text{m/s} + \left( -9.81\ \text{m/s}^2 \right)\left( 4.00 \ \text{s} \right) \\ v_{y_2} & = -29.2\ \text{m/s} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

$\therefore$ The coin has a velocity of 29.2 m/s directed downward 4.00 seconds after it is released. This confirms that the coin is indeed moving downwards at this point.

Part C

Considering figure C, we have two positions. Position 1 is the point of release 300 m above the ground with a velocity of 10 m/s upward. This is time 0 s.

The second position is at the ground where y=0 m. We are interested at the time in this position.

Considering position 1 as the initial position and position 2 as the final position.

\begin{align*} \Delta y & = v_{y_1} \Delta t+\frac{1}{2}a\left( \Delta t \right)^2 \\ y_2-y_1 & = v_{y_1}t+\frac{1}{2}at^2 \\ 0\ \text{m}-300\ \text{m} & = \left( 10 \ \text{m/s} \right)t+\frac{1}{2}\left( -9.81\ \text{m/s}^2 \right)t^2 \\ -300 & = 10t-4.905t^2 \\ 4.905t^2-10t-300 & = 0 \\ \end{align*}

Solve for the value of t using the quadratic formula with a=4.905, b=-10, and c=-300.

\begin{align*} t & = \frac{-b \pm \sqrt{b^2-4ac}}{2a}\\ t & = \frac{-\left( -10 \right) \pm \sqrt{\left( 10 \right)^2-4\left( 4.905 \right)\left( -300 \right)}}{2\left( 4.905 \right)}\\ t & = 8.91 \ \text{s} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

$\therefore$ The time is about 8.91 seconds before the coin hits the ground.

Advertisements

College Physics by Openstax Chapter 2 Problem 56

A steel ball is dropped onto a hard floor from a height of 1.50 m and rebounds to a height of 1.45 m. (a) Calculate its velocity just before it strikes the floor. (b) Calculate its velocity just after it leaves the floor on its way back up. (c) Calculate its acceleration during contact with the floor if that contact lasts 0.0800 ms (8.00×10⁻⁵ s) . (d) How much did the ball compress during its collision with the floor, assuming the floor is absolutely rigid?

Solution:

Part A

For this part, we shall consider Figure A.

We will be considering the two positions as shown. The first position is when the ball is dropped from a height of 1.50 meters. For this position, we know that y₁=1.50 m, t₁=0 s, and v_y1=0 m/s.

Position 2 is immediately after the ball hits the floor. For this position, we do not the time elapse and the velocity but we know that the height is zero. That is y₂=0 m.

Position 1 is the initial position and position 2 is the final position. Solving for v_y2, we have

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \Delta y \\ \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \left( y_2 - y_1 \right) \\ v_{y_2} & = \sqrt{\left( v_{y_1} \right)^2 + 2 a \left( y_2 - y_1 \right)} \\ v_{y_2} & = - \sqrt{\left( 0 \right)^2+2\left( -9.81\ \text{m/s}^2 \right)\left( 0\ \text{m} - 1.50\ \text{m} \right)} \\ v_{y_2} & = - 5.42 \ \text{m/s} \qquad {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

$\therefore$ The steel ball has a velocity of about 5.42 m/s directed downward when it strikes the floor.

Part B

Figure B shows the two positions we are interested in to solve for this part.

Position 1 is at the floor immediately just after the ball hits it. At this initial position, we have y1=0 m, and t1= 0 s. We do not know the velocity at this point.

At position 2, the ball bounced back to its second peak. We know that at the peak of a free falling body, the velocity is zero. So, for this final position, we have y₂=1.45 m, and v_y2=0 m/s. We do not know the time at this position.

Position 1 is the initial position while position 2 is the final position. Solving for the initial velocity we have

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \Delta y \\ \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \left( y_2 - y_1 \right) \\ \left( v_{y_1} \right)^2 & = \left( v_{y_2} \right)^2 - 2 a \left( y_2 - y_1 \right) \\ v_{y_1} & = \sqrt{\left( v_{y_2} \right)^2 - 2 a \left( y_2 - y_1 \right)} \\ v_{y_1} & = \sqrt{\left( 0 \ \text{m/s} \right)^2 -2\left( -9.81 \ \text{m/s}^2 \right) \left( 1.45 \ \text{m} - 0 \ \text{m} \right) }\\ v_{y_1} & = 5.33 \ \text{m/s} \qquad {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

$\therefore$ The steel ball has a velocity of about 5.33 m/s directed upward immediately after it leaves the floor.

Part C

From our answers in Part A and Part B, we have a change in velocity from -5.42 m/s to 5.33 m/s. So, in this case the initial velocity is v₁=-5.42 m/s and the final velocity is v₂=5.33 m/s. We can compute for the acceleration:

\begin{align*} a & = \frac{\Delta v}{\Delta t} \\ a & = \frac{v_2-v_1}{\Delta t} \\ a & = \frac{5.33 \ \text{m/s} - \left( -5.42 \ \text{m/s} \right)}{8.00 \times 10^{-5} \ \text{s}} \\ a & = 134,375 \ \text{m/s}^2 \\ a & = 1.34 \times 10^{5} \text{m/s}^2 \ \qquad {\color{DarkOrange} \left( \text{Answer} \right)}\\ \end{align*}

Part D

The period of compression happens when the ball has a velocity of -5.42 m/s until it reaches 0 m/s. We shall solve for the change in displacement for this two given velocities. The initial velocity is -5.42 m/s and the final velocity is 0 m/s. The acceleration during this period is the one solved in Part C, a=1.34×10⁵ m/s².

\begin{align*} \left( v_{y_2} \right)^2 & = \left( v_{y_1} \right)^2 + 2 a \Delta y \\ \Delta y & = \frac{\left( v_{y_2} \right)^2 - \left( v_{y_1} \right)^2}{2 a} \\ \Delta y & = \frac{\left( 0 \ \text{m/s} \right)^2 - \left( -5.42 \ \text{m/s} \right)^2}{2\left( 1.34 \times 10^5 \ \text{m/s}^2 \right)}\\ \Delta y & = -0.000110 \ \text{m} \\ \Delta y & = -1.10 \times 10^{-4} \ \text{m} \ \qquad \ {\color{DarkOrange} \left( \text{Answer} \right)}\\ \end{align*}

Advertisements

College Physics by Openstax Chapter 2 Problem 55

Suppose you drop a rock into a dark well and, using precision equipment, you measure the time for the sound of a splash to return.
(a) Neglecting the time required for sound to travel up the well, calculate the distance to the water if the sound returns in 2.0000 s.
(b) Now calculate the distance taking into account the time for sound to travel up the well. The speed of sound is 332.00 m/s in this well.

Solution:

Part A

Consider Figure A.

We shall consider two points for our solution. First, position 1 is the top of the well. In this position, we know that y₁=0, t₁=0 and v_y1=0.

Position 2 is located at the top of the water table where the rock will meet the water. Since we neglect the time for the sound to travel from position 2 to position 1, we can say that t₂=2.0000 s, the time of the rock to reach this position.

Solving for the value of y₂ will determine the distance between the two positions.

\begin{align*} \Delta y & = v_{y_1}t+\frac{1}{2}at^2 \\ y_2-y_1 & = v_{y_1}t+\frac{1}{2}at^2 \\ y_2 & = y_1 +v_{y_1}t+\frac{1}{2}at^2 \\ y_2 & = 0+0+\frac{1}{2}\left( -9.81\ \text{m/s}^2 \right)\left( 2.0000\ \text{s} \right)^2 \\ y_2 & = -19.6\ \text{m} \qquad {\color{DarkOrange} \left( \text{Answer }\right)} \end{align*}

Position 2 is 19.6 meters measured downward from position 1.

$\therefore$ The distance to the water is about 19.6 meters.

Part B

For this case, the 2.0000 seconds that is given includes the time that the rock travels from position 1 to position 2, t_r, and the time that the sound travels from position 2 to position 1, t_s.

\begin{align*} t_r+t_s & =2.0000\ \text{s} \\ t_s & = 2.0000\ \text{s}-t_r \end{align*}

Considering the motion of the rock from position 1 to position 2.

\begin{align*} \Delta y & = v_{y_1}t_r+\frac{1}{2}a\left( t_r \right)^2 \\ y_2-y_1 & = v_{y_1}t_r+\frac{1}{2}a\left( t_r \right)^2 \\ y_2 & = y_1 +v_{y_1}t_r+\frac{1}{2}a\left( t_r \right)^2 \\ y_2 & = 0+0+\frac{1}{2}\left( -9.81\ \text{m/s}^2 \right)\left( t_r \right)^2 \\ y_2 & = -4.905\left( t_r \right)^2 \qquad {\color{Blue} \text{Equation 1}}\\ \end{align*}

Now, let us consider the motion of the sound from position 2 to position 1. Sound is assumed to have a constant velocity of 322.00 m/s.

\begin{align*} \Delta y & = v_s \times t_s \\ y_1-y_2 & =\left( 322.00\ \text{m/s} \right)\left( t_s \right) \\ 0-y_2 & =\left( 322.00 \right)\left( 2.0000-t_r \right) \\ y_2 & = -322.00\left( 2.0000-t_r \right) \qquad {\color{Blue} \text{Equation 2}} \end{align*}

So, we have two equations from the two motions. We can solve the equations simultaneously.

\begin{align*} -4.905 \left( t_r \right)^2 & = -322.00\left( 2.0000-t_r \right) \\ 4.905 \left( t_r \right)^2 & =322.00\left( 2.0000-t_r \right) \\ 4.905 \left( t_r \right)^2 & = 644.00-322.00t_r \\ 4.905\left( t_r \right)^2 + 322.00t_r-644.00 & = 0 \\ \end{align*}

We can solve the quadratic formula using the quadratic equation.

\begin{align*} t_r & = \frac{-b \pm\sqrt{b^2-4ac}}{2a} \\ t_r & = \frac{-322.00\pm\sqrt{\left( 322.00 \right)^2-4\left( 4.905 \right)\left( -644.00 \right)}}{2\left( 4.905 \right)}\\ t_r & =1.9425 \ \text{s} \end{align*}

Now that we have solved for the value of t_r, we can use this to solve for y₂ using either Equation 1 or Equation 2. We will use equation 1.

\begin{align*} y_2 & = -4.905\left( t_r \right)^2 \\ y_2 & = -4.905 \left( 1.9425 \right)^2 \\ y_2 & =-18.5 \ \text{m} \qquad {\color{DarkOrange} \left( \text{Answer} \right)} \end{align*}

Position 2 is about 18.5 meters below position 1.

$\therefore$ In this case, the distance between the two positions is 18.5 meters.

Advertisements

Engineering Mathematics and Sciences

Your virtual study buddy in Mathematics, Engineering Sciences, and Civil Engineering

Tag Archives: College Physics by Openstax

College Physics by Openstax Chapter 2 Problem 64

(a) Take the slope of the curve in Figure 2.64 to find the jogger’s velocity at t=2.5 s. (b) Repeat at 7.5 s. These values must be consistent with the graph in Figure 2.65.

College Physics by Openstax Chapter 2 Problem 63

Construct the position graph for the subway shuttle train as shown in Figure 2.18(a). Your graph should show the position of the train, in kilometers, from t = 0 to 20 s. You will need to use the information on acceleration and velocity given in the examples for this figure.

College Physics by Openstax Chapter 2 Problem 62

By taking the slope of the curve in Figure 2.63, verify that the acceleration is 3.2 m/s² at t=10 s .

College Physics by Openstax Chapter 2 Problem 61

Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s.

College Physics by Openstax Chapter 2 Problem 60

Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s. Assume all values are known to 2 significant figures.

College Physics by Openstax Chapter 2 Problem 59

(a) By taking the slope of the curve in Figure 2.60, verify that the velocity of the jet car is 115 m/s at t=20 s. (b) By taking the slope of the curve at any point in Figure 2.61, verify that the jet car’s acceleration is 5.0 m/s² .

College Physics by Openstax Chapter 2 Problem 58

College Physics by Openstax Chapter 2 Problem 57

A coin is dropped from a hot-air balloon that is 300 m above the ground and rising at 10.0 m/s upward. For the coin, find (a) the maximum height reached, (b) its position and velocity 4.00 s after being released, and (c) the time before it hits the ground.

College Physics by Openstax Chapter 2 Problem 56

College Physics by Openstax Chapter 2 Problem 55

(a) Take the slope of the curve in Figure 2.64 to find the jogger’s velocity at t=2.5 s. (b) Repeat at 7.5 s. These values must be consistent with the graph in Figure 2.65.

Construct the position graph for the subway shuttle train as shown in Figure 2.18(a). Your graph should show the position of the train, in kilometers, from t = 0 to 20 s. You will need to use the information on acceleration and velocity given in the examples for this figure.

By taking the slope of the curve in Figure 2.63, verify that the acceleration is 3.2 m/s2 at t=10 s .

Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s.

Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s. Assume all values are known to 2 significant figures.

(a) By taking the slope of the curve in Figure 2.60, verify that the velocity of the jet car is 115 m/s at t=20 s. (b) By taking the slope of the curve at any point in Figure 2.61, verify that the jet car’s acceleration is 5.0 m/s2 .

A coin is dropped from a hot-air balloon that is 300 m above the ground and rising at 10.0 m/s upward. For the coin, find (a) the maximum height reached, (b) its position and velocity 4.00 s after being released, and (c) the time before it hits the ground.

By taking the slope of the curve in Figure 2.63, verify that the acceleration is 3.2 m/s² at t=10 s .

(a) By taking the slope of the curve in Figure 2.60, verify that the velocity of the jet car is 115 m/s at t=20 s. (b) By taking the slope of the curve at any point in Figure 2.61, verify that the jet car’s acceleration is 5.0 m/s² .