Tag Archives: Statics of Rigid Bodies

Hibbeler Statics 14E P1.3 — Representing a combination of units in the correct SI form

Represent each of the following combinations of units in the correct SI form using an appropriate prefix: (a) Mg/ms, (b) N/mm, and (c) mN/(kg・µs).

_{Statics of Rigid Bodies 14^th Edition by RC Hibbeler, Problem 1-3}

Solution:

Part A

\begin{align*} \text{Mg/ms} & = \frac{10^3 \ \text{kg}}{10^{-3} \ \text{s}} \\ & = 10^6 \text{kg/s}\\ & = \text{Gg/s} \end{align*}

Part B

\begin{align*} \text{N/mm} & = \frac{1\ \text{N}}{10^{-3} \ \text{m}}\\ & = 10^3 \ \text{N/m}\\ & = \text{kN/m} \end{align*}

Part C

\begin{align*} \frac{\text{mN}}{\left( \text{kg} \cdot \mu \text{s} \right)} & = \frac{10^{-3} \ \text{N}}{10^{-6} \ \text{kg} \cdot \text{s}}\\ & =10^3 \ \text{N}/\left( \text{kg} \cdot \text{s} \right)\\ & = \text{kN}/\left( \text{kg} \cdot \text{s}\right) \end{align*}

Advertisements

Statics 3.6 – Equilibrium of Truss Members Connected to a Gusset Plate | Hibbeler 14th Edition

The gusset plate is subjected to the forces of three members. Determine the tension force in member C and its angle θ for equilibrium. The forces are concurrent at point O. Take F=8 kN.

Engineering Mechanics: Statics 14th Edition by RC Hibbeler Problem 3-5 Equilibrium of Truss Members Connected in a Gusset Plate

Continue reading →

Statics 3.3 – Solving for the magnitude and direction of a force for equilibrium | Hibbeler 14th Edition

Determine the magnitude and direction θ of F so that the particle is in equilibrium.

Statics 14E Problem 3.3 Forces in Equilibrium with unknown force and its direction

Solution:

Free-body Diagram:

Equilibrium Equation:

Summation of forces in the x-direction:

\begin{aligned} \xrightarrow{+} \: \sum F_x & = 0 & \\ 5 \: \text{kN}+F \sin \theta - 8 \: \text {kN} \cos 30 \degree - 4\: \text{kN} \cos 60 \degree & = 0 & \\ F \sin \theta &= 3.9282 & (1) \end{aligned}

Summation of forces in the y-direction:

\begin{aligned} +\uparrow \sum F_y & = 0 &\\ 8 \sin 30 \degree - 4 \sin 60 \degree - F \cos \theta & =0 &\\ F \cos \theta & = 0.5359 & (2)\\ \end{aligned}

We now have two equations. Divide Eq (1) by (2)

\begin{aligned} \dfrac{F \sin \theta}{F \cos \theta} &= \dfrac{3.9282}{0.5359} \\ \dfrac{ \sin \theta}{ \cos \theta} & = 7.3301 \\ \end{aligned}

We know that $\tan \theta = \dfrac{\sin \theta}{\cos \theta}$ :

\begin{aligned} \tan \theta &=7.3301 \\ \theta & = \tan^{-1}7.3301\\ \textcolor{blue}\theta & \textcolor{blue}{=82.2\degree}\\ \end{aligned}

Substituting this result to equation (1), we have

\begin{aligned} F\sin 82.2 \degree & = 3.9282 \\ \textcolor{blue}F & \textcolor{blue}{=3.96 \ \text{kN}} \end{aligned}

Hibbeler Statics 14E P2.2 — Resultant of a System of Two Forces

Determine the magnitude of the resultant force $\textbf{F}_{\text{R}} = \textbf{F}_1 + \textbf{F}_2$ and its direction, measured counterclockwise from the positive x axis.

Engineering Mechanics: Statics figure for Problem 2-3

_{Engineering Mechanics: Statics 13th Edition by RC Hibbeler, Problem 2-1
Engineering Mechanics: Statics 14th Edition by RC Hibbeler, Problem 2-3}

SOLUTION:

The parallelogram law of the force system is shown.

Consider the triangle AOB.

Using cosine law to solve for the resultant force $\textbf{F}_{\text{R}}$

\begin{align*} \textbf{F}_\text{R} & =\sqrt{\left(250\right)^2+\left(375\right)^2-2\left(250\right)\left(375\right) \cos\:75^{\circ} }\\ & =393.2 \ \text{lb}\\ & =393\:\text{lb}\\ \end{align*}

The value of angle θ can be solved using sine law.

\begin{align*} \frac{393.2}{\sin\:\left(75^{\circ} \right)} & = \frac{250}{\sin\:\theta } \\ \sin \theta & = \frac{250 \ \sin75 \degree}{393.2}\\ \theta & =\sin^{-1} \left(\frac{250 \ \sin75 \degree}{393.2}\right)\\ \theta & = 37.89^{\circ}\\ \end{align*}

Solve for the unknown angle $\phi$ .

\phi =360^{\circ} -45^{\circ} +37.89^{\circ} =353^{\circ}

The resultant force has a magnitude of 393 lb and is located 353º measured counterclockwise from the positive x-axis.

Advertisements

Computing the mass and weight of a man on earth and on the moon

If a man weighs 155 lb on earth, specify (a) his mass in slugs, (b) his mass in kilograms, and (c) his weight in newtons. If the man is on the moon, where the acceleration due to gravity is gm=5.30 ft/s², determine (d) his weight in pounds, and (e) his mass in kilograms.

_{Engineering Mechanics: Statics 13th Edition by RC Hibbeler, Problem 1-21
Engineering Mechanics: Statics 14th Edition by RC Hibbeler, Problem 1-20}

Solution:

Part A

From the formula, $\text{W}=\text{mg}$ , we can solve for the mass by dividing the weight by the acceleration due to gravity. That is

\begin{align*} \text{m} & = \frac{\text{W}}{\textbf{g}}\\ & = \frac{155\ \text{lb}}{32.2 \ \text{ft/s}^2}\\ & = 4.81 \ \text{slug}\\ \end{align*}

Part B

Convert the slug to kilograms, knowing that 1 slug = 14.59 kg.

\begin{align*} \begin{align*} \text{m} & = \left( \frac{155}{32.2} \text{slug}\right)\left( \frac{14.59 \ \text{kg}}{1 \ \text{kg}} \right)\\ & = 70.2 \ \text{kg}\\ \end{align*} \end{align*}

Part C

Convert the 155 lb to newtons using 1 lb = 4.448 N.

\begin{align*} \textbf{W} & = 155 \ \text{lb}\times \frac{4.448 \ \text{N}}{1 \ \text{lb}}\\ & = 689 \ \text{N}\\ \end{align*}

Part D

Using the same formulas, but now $\textbf{g}=5.30 \ \text{ft/s}^2$ .

\textbf{W}=155\left(\frac{5.30}{32.2}\right)=25.5\:\text{lb}

Part E

\textbf{m}=155\left(\frac{14.59\:\text{kg}}{32.2}\right)=70.2\:\text{kg}

Advertisements

The force of gravity acting between two particles

Two particles have a mass of 8 kg and 12 kg, respectively. If they are 800 mm apart, determine the force of gravity acting between them. Compare this result with the weight of each particle.

_{Engineering Mechanics: Statics 13th Edition by RC Hibbeler, Problem 1-20}
_{Engineering Mechanics: Statics 14th Edition by RC Hibbeler, Problem 1-21}

Solution:

The force of gravity acting between them:

\begin{align*} \textbf{F} & =\textbf{G}\cdot \frac{\text{m}_1\text{m}_2}{\text{r}^2}\\ & =66.73\left(10^{-12}\right) \text{m}^3/ \left( \text{kg} \cdot \text{s}^2 \right) \left[\frac{8 \ \text{kg} \left(12\ \text{kg}\right)}{\left(0.8\ \text{m} \right)^2}\right]\\ &=10\left(10^{-9}\right)\ \text{N}\\ & =10.0 \ \text{nN}\\ \end{align*}

The weight of the 8 kg particle

\textbf{W}_1=8\left(9.81\right)=78.5\:\text{N}

Weight of the 12 kg particle

\textbf{W}_2=12\left(9.81\right)=118\:\text{N}

Advertisements

Expressing the Density of Water in SI Units

Water has a density of 1.94 slug/ft³. What is the density expressed in SI units? Express the answer to three significant figures.

_{Engineering Mechanics: Statics 13^th Edition by RC Hibbeler, Problem 1-19}
_{Engineering Mechanics: Statics 14^th Edition by RC Hibbeler, Problem 1-17}

Solution:

\begin{align*} \rho _w & =\left(\frac{1.94\:\text{slug}}{1\:\text{ft}^3}\right)\left(\frac{14.59\:\text{kg}}{1\:\text{slug}}\right)\left(\frac{1\:\text{ft}^3}{0.3048^3\:\text{m}^3}\right) \\ & =\left(\frac{1.94\:\text{slug}}{1\:\text{ft}^3}\right)\left(\frac{14.59\:\text{kg}}{1\:\text{slug}}\right)\left(\frac{1\:\text{ft}^3}{0.3048^3\:\text{m}^3}\right) \\ & =999.6\:\frac{\text{kg}}{\text{m}^3}\\ & =1.00\:\text{Mg/m}^3\\ \end{align*}

Advertisements

Showing How an Equation is Dimensionally Homogeneous

Using the SI system of units, show that Eq. 1–2 is a dimensionally homogeneous equation which gives F in newtons. Determine to three significant figures the gravitational force acting between two spheres that are touching each other. The mass of each sphere is 200 kg and the radius is 300 mm.

_{Engineering Mechanics: Statics 13^th Edition by RC Hibbeler, Problem 1-18}
_{Engineering Mechanics: Statics 14^th Edition by RC Hibbeler, Problem 1-15}

Solution:

To prove that F is in Newtons, we have

\begin{align*} \text{F} & =\text{G}\cdot \frac{\text{m}_1\text{m}_2}{\text{r}^2}\\ & =\left(\frac{\text{m}^3}{\text{kg}\cdot \text{s}^2}\right)\left(\frac{\text{kg}\cdot \text{kg}}{\text{m}^2}\right)\\ & =\frac{\text{kg}\cdot \text{m}}{\text{s}^2}\\ & =\text{N} \end{align*}

Now, if we substitute the given values into the equation

\begin{align*} \text{F} & = 66.73\left(10^{-12}\right)\left[\frac{200\left(200\right)}{0.6^2}\right]\\ & = 7.41\left(10^{-6}\right) \text{N}\\ & =7.41\ \mu \text{N}\\ \end{align*}

Advertisements

Engineering Mechanics: Statics 14th Edition by RC Hibbeler Solution Manual

You can purchase the complete solution manual of the Engineering Mechanics: Statics 14th Edition by Russell Hibbeler in this page.

General Principles: Statics of Rigid Bodies 14th Edition by RC Hibbeler

Force System Resultants

Equilibrium of a Rigid Body

Structural Analysis

Internal Forces

Friction

Center of Gravity and Centroid

Moment of Inertia

Virtual Work

Advertisements

Evaluation of Expressions to SI Units with Appropriate Prefix

Evaluate each of the following to three significant figures and express each answer in SI units using an appropriate prefix: (a) 354 mg (45 km)/(0.0356 kN), (b) (0.00453 Mg)(201 ms), and (c) 435 MN/23.2 mm.

_{Engineering Mechanics: Statics 13^th Edition by RC Hibbeler, Problem 1-11}
_{Engineering Mechanics: Statics 14^th Edition by RC Hibbeler, Problem 1-18}

Solution:

Part A

\begin{align*} \frac{\left(354\:\text{mg}\right)\left(45\:\text{km}\right)}{0.0356\:\text{kN}} & = \frac{\left[354\left(10^{-3}\right)\:\text{g}\right]\left[45\left(10^3\right)\:\text{m}\right]}{0.0356\:\left(10^3\right)\:\text{N}}\\ & = \frac{0.447\:\left(10^3\right)\text{g}\cdot \text{m}}{\text{N}}\\ & = 0.447\:\text{kg}\cdot \text{m/N} \end{align*}

Part B

\begin{align*} \left(0.00453\:\text{Mg}\right)\left(201\:\text{ms}\right) & =\left[4.53\left(10^{-3}\right)\left(10^3\right)\text{kg}\right]\left[201\:\left(10^{-3}\right)\text{s}\right]\\ & =0.911\:\text{kg}\cdot \text{s}\\ \end{align*}

Part C

\begin{align*} 435\:\text{MN}/23.2\:\text{mm} & =\frac{435\:\left(10^6\right)\:\text{N}}{23.2\:\left(10^{-3}\right)\:\text{m}}\\ & = \frac{18.75\left(10^9\right)\:\text{N}}{\text{m}}\\ & =18.8\:\text{GN/m} \end{align*}

Advertisements

Engineering Mathematics and Sciences

Your virtual study buddy in Mathematics, Engineering Sciences, and Civil Engineering

Tag Archives: Statics of Rigid Bodies

Hibbeler Statics 14E P1.3 — Representing a combination of units in the correct SI form

Represent each of the following combinations of units in the correct SI form using an appropriate prefix: (a) Mg/ms, (b) N/mm, and (c) mN/(kg・µs).

Part C

Statics 3.6 – Equilibrium of Truss Members Connected to a Gusset Plate | Hibbeler 14th Edition

The gusset plate is subjected to the forces of three members. Determine the tension force in member C and its angle θ for equilibrium. The forces are concurrent at point O. Take F=8 kN.

Statics 3.3 – Solving for the magnitude and direction of a force for equilibrium | Hibbeler 14th Edition

Determine the magnitude and direction θ of F so that the particle is in equilibrium.

Solution:

Hibbeler Statics 14E P2.2 — Resultant of a System of Two Forces

Determine the magnitude of the resultant force $\textbf{F}_{\text{R}} = \textbf{F}_1 + \textbf{F}_2$ and its direction, measured counterclockwise from the positive x axis.

Computing the mass and weight of a man on earth and on the moon

If a man weighs 155 lb on earth, specify (a) his mass in slugs, (b) his mass in kilograms, and (c) his weight in newtons. If the man is on the moon, where the acceleration due to gravity is gm=5.30 ft/s², determine (d) his weight in pounds, and (e) his mass in kilograms.

The force of gravity acting between two particles

Two particles have a mass of 8 kg and 12 kg, respectively. If they are 800 mm apart, determine the force of gravity acting between them. Compare this result with the weight of each particle.

Expressing the Density of Water in SI Units

Water has a density of 1.94 slug/ft³. What is the density expressed in SI units? Express the answer to three significant figures.

Showing How an Equation is Dimensionally Homogeneous

Using the SI system of units, show that Eq. 1–2 is a dimensionally homogeneous equation which gives F in newtons. Determine to three significant figures the gravitational force acting between two spheres that are touching each other. The mass of each sphere is 200 kg and the radius is 300 mm.

Engineering Mechanics: Statics 14th Edition by RC Hibbeler Solution Manual

General Principles

Force Vectors

Equilibrium of a Particle

Force System Resultants

Equilibrium of a Rigid Body

Structural Analysis

Internal Forces

Friction

Center of Gravity and Centroid

Moment of Inertia

Virtual Work

Evaluation of Expressions to SI Units with Appropriate Prefix

Evaluate each of the following to three significant figures and express each answer in SI units using an appropriate prefix: (a) 354 mg (45 km)/(0.0356 kN), (b) (0.00453 Mg)(201 ms), and (c) 435 MN/23.2 mm.

Represent each of the following combinations of units in the correct SI form using an appropriate prefix: (a) Mg/ms, (b) N/mm, and (c) mN/(kg・µs).

Part C

The gusset plate is subjected to the forces of three members. Determine the tension force in member C and its angle θ for equilibrium. The forces are concurrent at point O. Take F=8 kN.

Determine the magnitude and direction θ of F so that the particle is in equilibrium.

Solution:

Determine the magnitude of the resultant force \textbf{F}_{\text{R}} = \textbf{F}_1 + \textbf{F}_2 and its direction, measured counterclockwise from the positive x axis.

If a man weighs 155 lb on earth, specify (a) his mass in slugs, (b) his mass in kilograms, and (c) his weight in newtons. If the man is on the moon, where the acceleration due to gravity is gm=5.30 ft/s², determine (d) his weight in pounds, and (e) his mass in kilograms.

Two particles have a mass of 8 kg and 12 kg, respectively. If they are 800 mm apart, determine the force of gravity acting between them. Compare this result with the weight of each particle.

Water has a density of 1.94 slug/ft³. What is the density expressed in SI units? Express the answer to three significant figures.

Using the SI system of units, show that Eq. 1–2 is a dimensionally homogeneous equation which gives F in newtons. Determine to three significant figures the gravitational force acting between two spheres that are touching each other. The mass of each sphere is 200 kg and the radius is 300 mm.

Force System Resultants

Equilibrium of a Rigid Body

Structural Analysis

Internal Forces

Friction

Center of Gravity and Centroid

Moment of Inertia

Virtual Work

Evaluate each of the following to three significant figures and express each answer in SI units using an appropriate prefix: (a) 354 mg (45 km)/(0.0356 kN), (b) (0.00453 Mg)(201 ms), and (c) 435 MN/23.2 mm.

Determine the magnitude of the resultant force $\textbf{F}_{\text{R}} = \textbf{F}_1 + \textbf{F}_2$ and its direction, measured counterclockwise from the positive x axis.