(a) Take the slope of the curve in Figure 2.64 to find the jogger’s velocity at t=2.5 s. (b) Repeat at 7.5 s. These values must be consistent with the graph in Figure 2.65.
Figure 2.64
Solution:
Part A
To find the slope at t=2.5 s, we need the position values at t= 0 s and t=5 s. When t=0s, x=0m, and when t=5s, x=17.5m. The velocity at t=2.5 s is
Construct the position graph for the subway shuttle train as shown in Figure 2.18(a). Your graph should show the position of the train, in kilometers, from t = 0 to 20 s. You will need to use the information on acceleration and velocity given in the examples for this figure.
(a) Position of the train over time. Notice that the train’s position changes slowly at the beginning of the journey, then more and more quickly as it picks up speed. Its position then changes more slowly as it slows down at the end of the journey. In the middle of the journey, while the velocity remains constant, the position changes at a constant rate. (b) The velocity of the train over time. The train’s velocity increases as it accelerates at the beginning of the journey. It remains the same in the middle of the journey (where there is no acceleration). It decreases as the train decelerates at the end of the journey. (c) The acceleration of the train over time. The train has positive acceleration as it speeds up at the beginning of the journey. It has no acceleration as it travels at constant velocity in the middle of the journey. Its acceleration is negative as it slows down at the end of the journey.
Although not equal, the computed slope is almost the same with 0.24 m/s. This is due to the fact that values are uncertainties when using graphs. The difference is not really significant for this case.
Using approximate values, calculate the slope of the curve in Figure 2.62 to verify that the velocity at t=30.0 s is approximately 0.24 m/s. Assume all values are known to 2 significant figures.
Figure 2.62
Solution:
We can obviously see from the graph that it is a straight line or approximately a straight line. In this case, the slope is constant.
To get an approximate slope at t=30 s, we can use the values at t=20 s and t=40 s. When t=20s, x=7m and when t=40s, x=12m.
Although not equal, the computed slope is almost the same with 0.24 m/s. This is due to the fact that values are uncertain when using graphs. The difference is not really significant for this case.
A graph of v(t) is shown for a world-class track sprinter in a 100-m race. (See Figure 2.67). (a) What is his average velocity for the first 4 s? (b) What is his instantaneous velocity at t=5 s? (c) What is his average acceleration between 0 and 4 s? (d) What is his time for the race?
Figure 2.67
Solution:
Part A
To find the average velocity over the straight line graph of the velocity vs time shown, we just need to locate the midpoint of the line. In this case, the average speed for the first 4 seconds is
vave=6m/s(Answer)
Part B
Looking at the graph, the velocity at exactly 5 seconds is 12 m/s.
Part C
If we are given the velocity-time graph, we can solve for the acceleration by solving for the slope of the line.
Consider the line from time zero to time, t=4 seconds. The slope, or acceleration, is
a=slope=4s12m/s−0m/s=3m/s2(Answer)
Part D
For the first 4 seconds, the distance traveled is equal to the area under the curve.
distance=21(4sec)(12m/s)=24m
So, the sprinter traveled a total of 24 meters in the first 4 seconds. He still needs to travel a distance of 76 meters to cover the total racing distance. At the constant rate of 12 m/s, he can run the remaining distance by
You must be logged in to post a comment.